Steps to deploy Windows 10 with Configuration Manager – Windows Deployment | Microsoft Docs – Part 1 | Windows 10 Resources

  • Post author:
  • Post category:1gal

Looking for:

Complete SCCM Windows 10 Deployment Guide System Center Dudes

Click here to Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

You must wait until the content is distributed to distribution points. You can know that when you check the content status. Green color indicates the content has been distributed to the DP. Under Select a new task sequence to be created, click Install an existing image package. Specify the task sequence name. Click Browse and select the boot image.

The Image Index should be populated automatically. To activate your copy of Windows 10, specify the product key.

You can also choose to randomly generate local admin password or you can specify an administrator password. Select Join a domain, specify the domain and domain OU. Specify the account that has permissions to join the machine to the domain. If you need to specify additional installation properties while installing SCCM client, you can specify it here.

Right click Install Windows 10 task sequence and click Deploy. On the Data Source page, specify the path to Windows 10 install. This file is located within sources folder. One good option that I see here is you can extract a specific image index from the WIM file. For example, you want to deploy Windows 10 enterprise, so you can extract only Windows 10 enterprise out of WIM file.

Check that box and select Windows 10 Enterprise as Image Index. Click Next. On the General page, specify OS image information such as Name, version and comment. This also confirms you have successfully imported it in SCCM. Specify task sequence name.

You must select a boot image. Click Browse and select 64 bit boot image. You may select Run as high performance power plan. While this is completely optional, I will still select this for my deployment. On the Install Windows page, click Browse and specify Image package. Check the box Partition and format target computer before installing the operating system. If you have a product key, specify it here. Next, you may set a local administrator password for this OS or use the randomly generate local admin pass option.

On the Configure Network page, select if you want the machine to be part of domain or workgroup. You must also specify an account that has enough permissions to join the machine to domain. The Configuration Manager client package is automatically selected. You may specify additional installation properties if you wish to. We will be importing the default Install. We will cover this in the next section. This package will be used to upgrade an existing Windows 10 or a Windows 7 or 8.

This Task Sequence could be used to upgrade an existing Windows 7 or 8. SCCM will take care of everything in a couple of steps :. We are now ready to deploy our task sequence to the computer we want to upgrade. In our case, we are targeting a Windows 10 computer that is running Windows 10 Everything is now ready to deploy to our Windows 10 computers.

For our example, we will be upgrading a Windows 10 to Windows 10 21H1. This task sequence can also be used to upgrade existing Windows 7 or 8. To install the Windows 10 21H1 operating system, the process is fairly the same except to start the deployment.

If you encounter any issues, please see our troubleshooting guide. Once Windows 10 is added to your Software Update Point , we will create a Software Update deployment that will be deployed to our Windows 10 deployment collection. This is really the most straight forward and fastest method to deploy. As stated in the introduction of this post, you can use Servicing Plan to automate the Windows 10 deployment. You can only deploy this Enablement Package to Windows 10 Version and 20H2 devices that have installed the or later Cumulative Update.

This is called Hard Block. We have numerous resources on our site for advanced monitoring and we also have pages that cover the whole topic.

 
 

Windows 10 deployment scenarios (Windows 10) – Windows Deployment | Microsoft Docs

 

It resumes the delloyment after a day automatically without any intervention. This behavior is observed on all нажмите чтобы увидеть больше models. After it resumes the imaging, no issues observed after that, it just images fine. Using the Install. Experienced the same behavior even on Windows 10 20H2. Deployment monitoring: got stuck dowbload PM and automatically resumed next day.

Event Viewer:. Windows 10 sccm deployment just a moment free download Up to 10 attachments including images can be used with a maximum of 3. Thank you RahulJindal I will try and share the feedback here. Use the ccmsetup. First try with adding the reboot after the installation of the agent. Wndows a custom client package is only good as long as you can keep it updated and normally it should not be required.

I added a reboot right after the default SCCM package step, the windows 10 sccm deployment just a moment free download still got stuck after the reboot.

Interestingly, this happens only on new dell models, however the old models are imaging just fine with default sccm client package without reboot step windows 10 sccm deployment just a moment free download setup config manager step. But I’d agree with Downloavstart with adding dlwnload restart as your first change, hopefully koment enough. Tried adding restart after sccm client install step, did not help. Also, added the latest WinPE drivers in http://replace.me/1007.txt bootimage and tried a fresh image.

After Configuration manager performs a reboot, laptop will be showing up nothing but a blank black screenwhen some key is pressed, it shows “configuring configuration manager”.

Without any key being pressed, laptop stays in that black screen for jusst a day wondows continues imaging 1 its ссылка. Thanks for the suggestion ColinFord We already have that parameter added in our Setup config manager step. It seems that you have tried the methods that provided by Colin. Are there any results?

Is the problem solved? Your updates may help others who have the similar issue. If you need any further assistance, feel free to let us know. And windows 10 sccm deployment just a moment free download you mentioned that the issue happens only on some Dell models. There’s another recommendation that we contact Dell support to see if they have sccm comments about this.

If the response is helpful, please click ” Accept Answer “and upvote it. Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.

However, that does not help. Also, I kinda feel, that the issue here does not have anything do with sccm, coz the every single time I image an old dell model, the image works just fine. However, it is getting stuck after sccm client reboot autodesk 3ds max essentials free time I image a new model Dell Latitude, However the old models like and are imaging just fine without getting stuck.

Note: Image stuck, meaning, the laptop will just show a blank screen black and if any key is pressed, the image will resume immediately, else it will resume on its own after 25hrs. After the sccm client installation exits with 0 on the laptops where the image is stuckI see these time related entries.

Whereas on the older laptops, where dowhload image is working fine, I dont see them. Configuration Manager sccm looking for policy. The operating windows 10 sccm deployment just a moment free download reported error The specified path is invalid. Skip to main content. Find threads, tags, and users Comment Show 0. Current Visibility: Visible deploy,ent all users. Try the following – Use a custom client package instead of using the default one.

Add a reboot right after the installation of the ConfigMgr agent. Update: I added a reboot right after the default SCCM package step, the laptop still got stuck after the reboot. I will try with custom SCCM client package with restart step after it. It is very interesting that your machine hangs on that SetupComplete.

Also, this issue happens only on certain new dell models not all the models. Thanks for your time! However the old models like and are imaging just fine without getting stuck Note: Image stuck, meaning, the laptop will just show a blank screen black and if any key is pressed, the http://replace.me/3482.txt will resume immediately, else it will resume on its dowlnoad after 25hrs.

I tried importing newer WinPE drivers as well, does not help. Are the models in question being imaged using an external ethernet adapter or are they docked? Related Questions. Configuration Manager 1 looking for policy exit code

 

SCCM OSD Task Sequence deployment stuck after the first reboot – Microsoft Q&A

 

NET 2. Enable Windows Update in the task sequence by clicking the Windows Update Post-Application Installation step, clicking the Options tab, and clearing the Disable this step checkbox. Since we aren’t installing applications in this test lab, there’s no need to enable the Windows Update Pre-Application Installation step.

However, you should enable this step if you’re also installing applications. The next step is to configure the MDT deployment share rules. Select Apply and then select Edit Bootstrap.

Replace the contents of the Bootstrap. The update process will take 5 to 10 minutes. When it has completed, select Finish. Accept the default values on the Capture Image page, and select Next. OS installation will complete after 5 to 10 minutes and then the VM will reboot automatically. Allow the system to boot normally, don’t press a key. The process is fully automated.

Other system restarts will occur to complete updating and preparing the OS. Setup will complete the following procedures:. This step requires from 30 minutes to 2 hours, depending on the speed of the Hyper-V host and your network’s download speed.

After some time, you’ll have a Windows 10 Enterprise x64 image that is fully patched and has run through Sysprep. Make sure there’s no space at the end of the location or you’ll get an error. Select Windows 10 Enterprise x64 and monitor the status of content distribution until it’s successful and no longer in progress. Refresh the view with the F5 key or by right-clicking Windows 10 Enterprise x64 and clicking Refresh. Processing of the image on the site server can take several minutes.

This action adds a new step immediately after Set Status 5. In this case, skip the first four steps below and begin with step 5 to edit CustomSettings. Select the Monitoring tab, select the Enable monitoring for this deployment share checkbox, and then select OK.

For example, the following option will capture settings from all user accounts:. In this first deployment scenario, you’ll deploy Windows 10 using PXE. This scenario creates a new computer that doesn’t have any migrated users or settings.

In the Task Sequence Wizard, provide the password: pass word1 , and then select Next. A command prompt will open. At the command prompt, type explorer. The smsts. Depending on the deployment phase, the smsts. Note: If a reboot is pending on the client, the reboot will be blocked as long as the command window is open. In the explorer window, select Tools and then select Map Network Drive.

Don’t map a network drive at this time. If you need to save the smsts. Select Next to continue with the deployment. The task sequence will require several minutes to complete. The task sequence will:. Right-click Start , select Run , type control appwiz. This feature is included in the reference image. The following two procedures 1 Replace a client with Windows 10 and 2 Refresh a client with Windows 10 have been exchanged in their order in this guide compared to the previous version.

Begin the process of evaluating the impact of application compatibility in your deployment project :. Understand the different ways that it can be deployed, especially now that there are new scenarios to consider. Choosing among these scenarios, and understanding the key capabilities and limitations of each, is a key task :.

In the first part of this blog series on how to deploy Windows 10 with SCCM, we will prepare our environment for Windows Your distribution point will now install Windows Deployment Services if not already installed and will copy the necessary files on the distribution point.

Before launching your first boot image you must include your Windows 10 drivers into the boot image. Our rule of thumb about drivers is to try to boot a certain model and if it fails, add the drivers. We will now make a couple customization to the boot image to enable command support F8 and add a custom background image to the deployment.

We will start by importing the default Install. This package will be used to upgrade a Windows 7 or 8. One important thing in any OSD project, is to make sure that every machines deployments are up to date. Before deploying Windows 10, make sure that your Software Update Point is configured to include Windows 10 patches. Once Windows 10 is added to your Software Update Point , we will create a Software Update Group that will be deployed to our Windows 10 deployment collection.

This way, all patches released after the Windows 10 media creation or your Capture date will be deployed during the deployment process. If you are planning to use USMT to capture and restore user settings and files, you need to make sure that the USMT package is created and distributed. Read the next parts of this blog series to successfully deploy Windows Complete the preparation of your environment before reading this post. Now that your Task Sequence is created, we will deploy it to a collection and start a Windows 10 deployment.

This task sequence will format and install a new OS to targeted devices. This is the collection that will receive the Windows 10 installation.

For testing purposes, we recommend putting only 1 computer to start Select the Purpose of the deployment Available will prompt the user to install at the desired time Required will force the deployment at the deadline see Scheduling In the Make available to the following drop down, select the Only media and PXE. This will ensure that you do not send the deployment on clients.

We can start the deployment on the machine. Make sure that your system is a member of your deployment collection and start the device. For this example, we will be using a virtual machine running on Hyper-V.

See our blog post on this topic which covers the various ways to monitor your Task Sequence progress. You will be able to edit this task sequence later to customize it to your environment. The goal of a build and capture task sequence is to capture a reference machine OS in order to redeploy its configuration multiple time.

As a best practice, we recommend not to add too much software and customization to your reference image. Rather, use the task sequence steps to customize your deployment which decrease management operation tasks in the long run.

For example, if you want to include Adobe Reader to your reference image because all your users need it, do not install it on your reference machine and do your capture. Instead, use the Installed Software step in the capture task sequence. When a new version of Adobe Reader will be released, it will be a matter of a couple of clicks to replace the old version with the new one. Now that our Task Sequence is created, we will deploy it to a collection and start a Windows 10 Build and capture.

Be careful when targeting the deployment. Make sure that the system you want to capture is a member of your deployment collection and start the device. See this Technet article to know how to import a computer. See our blog post on this topic which covers the various ways to monitor your task sequence progress.

This allows us to track task sequence start, end time and most importantly errors if any. Our post will show 4 different ways to monitor SCCM task sequences. Each of them has its own benefits and drawbacks. You can view the progress of a task sequence using the SCCM console. This method is simple and easy but permit to see the status of only one machine at the time.

This method is useful to have messages from multiple devices instead of targeting a specific computer like in the previous methods. This method is a bit trickier to implement. The majority of the reports focus on statistics about overall deployments. To monitor progress, we refer to the 2 following reports :. As you can see, readability is easier using the console but keep in mind that reports can be accessible without having console access. We offer a report for you to buy to keep track of your Windows 10 deployment.

The report gives you all the information needed to keep track of a deployment. Another downside is that this file location change depending on the stage you are at :. We hope this post will ease your Windows 10 deployments. Leave your comments and questions in the comment section. The goal of an upgrade task sequence is to upgrade an existing operating system to Windows 10 without loosing any data and installed software.

In the past, an in-place upgrade scenario was not a reliable and popular option to deploy the latest version of Windows. Windows 10 is now managed as a service , this upgrade process can also be used to migrate Windows 10 to a later Windows 10 release or you can use the new Windows 10 servicing feature in SCCM and later. If you want to understand all the phases in the upgrade process, we strongly recommend watching the Upgrading to Windows In Depth video from the last Microsoft Ignite event.

We are now ready to deploy our task sequence to the computer we want to upgrade. For more information, see Configure devices without MDM. While the initial Windows 10 release includes a variety of provisioning settings and deployment mechanisms, these will continue to be enhanced and extended based on feedback from organizations. As with all Windows features, organizations can submit suggestions for additional features through the Windows Feedback app or through their Microsoft Support contacts.

New versions of Windows have typically been deployed by organizations using an image-based process built on top of tools provided in the Windows Assessment and Deployment Kit , Windows Deployment Services, the Deploy Windows 10 with the Microsoft Deployment Toolkit , and Microsoft Endpoint Configuration Manager. With the release of Windows 10, all of these tools are being updated to fully support Windows Although newer scenarios such as in-place upgrade and dynamic provisioning may reduce the need for traditional deployment capabilities in some organizations, these traditional methods remain important and will continue to be available to organizations that need them.

The traditional deployment scenario can be divided into different sub-scenarios. These are explained in detail in the following sections, but the following provides a brief summary:.

Also called a “bare metal” deployment. This scenario occurs when you have a blank machine you need to deploy, or an existing machine you want to wipe and redeploy without needing to preserve any existing data. You can also generate a full offline media that includes all the files needed for a client deployment, allowing you to deploy without having to connect to a central deployment share. A refresh is sometimes called wipe-and-load. The process is normally initiated in the running operating system.

User data and settings are backed up and restored later as part of the deployment process. The target can be the same as for the new computer scenario. A computer replace is similar to the refresh scenario. However, since we are replacing the machine, we divide this scenario into two main tasks: backup of the old client and bare-metal deployment of the new client. As with the refresh scenario, user data and settings are backed up and restored. There’s another recommendation that we contact Dell support to see if they have some comments about this.

If the response is helpful, please click ” Accept Answer “and upvote it. Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread. However, that does not help. Also, I kinda feel, that the issue here does not have anything do with sccm, coz the every single time I image an old dell model, the image works just fine. However, it is getting stuck after sccm client reboot every time I image a new model Dell Latitude , , , , However the old models like and are imaging just fine without getting stuck.

Note: Image stuck, meaning, the laptop will just show a blank screen black and if any key is pressed, the image will resume immediately, else it will resume on its own after 25hrs. After the sccm client installation exits with 0 on the laptops where the image is stuck , I see these time related entries. Whereas on the older laptops, where the image is working fine, I dont see them.

Configuration Manager is looking for policy. Here are a few examples:. The following settings instruct the task sequence to install the HP Hotkeys package, but only if the hardware is an HP EliteBook w. You don’t have to add the package to the task sequence. The following settings instruct the task sequence to put laptops and desktops in different organizational units OUs during deployment, assign different computer names, and finally have the task sequence install the Cisco VPN client, but only if the machine is a laptop.

When testing a deployment, it’s important to be able to quickly test any changes you make to the deployment without needing to run through an entire deployment. MDT rules can be tested quickly, saving significant testing time in a deployment project. For more information, see Configure MDT settings. In fact, any script or app that can read an Open Data OData feed can read the information.

For some deployment scenarios, you may need to prompt the user for information during deployment such as the computer name, the correct organizational unit OU for the computer, or which applications should be installed by the task sequence. By providing well-established, supported solutions, MDT reduces the complexity of deployment in Configuration Manager. You can create reference images for Configuration Manager in Configuration Manager, but in general we recommend creating them in MDT Lite Touch for the following reasons:.

Skip to main content. This browser is no longer supported.

 
 

 
 
You will be able to edit this task sequence later to customize it to your environment.